Search results for "Flow conditions"

Comparing flow resistance law for fixed and mobile bed rills

2019

Rills caused by run-off concentration on erodible hillslopes have very irregular profiles and cross-section shapes. Rill erosion directly depends on the hydraulics of flow in the rills, which may differ greatly from hydraulics of flow in larger and regular channels. In this paper, a recently theoretically deduced rill flow resistance equation, based on a power–velocity profile, was tested experimentally on plots of varying slopes (ranging from 9% to 26%) in which mobile and fixed bed rills were incised. Initially, measurements of flow velocity, water depth, cross-section area, wetted perimeter, and bed slope, carried out in 320 reaches of mobile bed rills and in 165 reaches of fixed rills, …

Closure to “Extraction of the Flow Rate Equation under Free and Submerged Flow Conditions in Pivot Weirs with Different Side Contractions” by N. Shei…

2018

What Flow Conditions are Conducive to Banner Cloud Formation?

2016

Abstract Banner clouds are clouds that are attached to the leeward slope of a steep mountain. Their formation is essentially due to strong Lagrangian uplift of air in the lee of the mountain. However, little is known about the flow regime in which banner clouds can be expected to occur. The present study addresses this question through numerical simulations of flow past idealized orography. Systematic sets of simulations are carried out exploring the parameter space spanned by two dimensionless numbers, which represent the aspect ratio of the mountain and the stratification of the flow. The simulations include both two-dimensional flow past two-dimensional orography and three-dimensional fl…

Influence of oscillating main flow on separation efficiency in asymmetrical flow field-flow fractionation.

2021

The steadily rising interest in the investigation of interactions between nanomaterials and biological media has also led to an increasing interest in asymmetrical flow field-flow fractionation (AF-FFF). The biggest strength of AF-FFF is the possibility to alter the flow profiles to suit a specific separation problem. In this paper, the influence of an oscillating main flow on the separation efficiency of AF-FFF is investigated. Such oscillations can e.g. be caused by the main pump To investigate the influence of such flow conditions on the separation efficiency in AF-FFF systematically, different oscillation profiles were applied and their influence on the elution profile and the retention…

Dilute solution rheology of flexible macromolecules (bead–rod model)

1974

The rheological behavior of dilute solutions of flexible macromolecules is studied by means of a freely jointed multiple bead–rod model. The solution of the equations describing the mechanics of the system is obtained by means of a numerical procedure, which applies to arbitrary flow conditions. The case of the transient stress in uniaxial elongational flow is developed in some detail. A comparison with bead–spring models shows both quantitative and qualitative differences which are briefly discussed.

Flume experiments for assessing the dye-tracing technique in rill flows

2021

Abstract Flow velocity controls hillslope soil erosion and is a key hydrodynamic variable involved in sediment transport and deposition processes. The dye-tracer technique is one of the most applied methods for measuring velocity of shallow interrill and rill flow. The technique is based on the injection of a tracer in a specific point and the measurement of its speed to travel the known distance from the injection point to a given channel section. The dye-tracer technique requires that the measured surface flow velocity has to be corrected to obtain the mean flow velocity using a correction factor which is generally empirically deduced. The technique has two sources of uncertainties: i) th…

Flow resistance law under equilibrium bed-load transport conditions

2018

Abstract The uniform flow resistance equation, in the form due to Manning or Darcy-Weisbach, is often applied to determine the stage-discharge relationship of a river cross-section. The application of this equation, namely the slope-area method, allows to indirectly measure by water level readings the corresponding river discharge. In this paper, a recently deduced flow resistance equation for open channel flow was tested during conditions of equilibrium bed-load transport. First the flow resistance equation was determined by dimensional analysis and applying the condition of incomplete self-similarity for the flow velocity profile. Then the analysis was developed by the following steps: (i…

A novel pressure regulation system based on Banki hydro turbine for energy recovery under in-range and out-range discharge conditions

2021

Abstract Efficiency improvement of water distribution networks needs to be in place to guarantee a long life period under suitable operating conditions. Excessive pressure is among the well-known issues encountered in water distribution networks which can cause strength damages to the piping system. In order to overcome this drawback and to reach a suitable water pressure delivery, the present work suggests a novel pressure regulation system. This regulation system is consisting of a Banki turbine equipped with a mobile flap as a control device. The suggested pressure regulation system was experimentally and numerically investigated under in-range i.e. like actual water distribution network…

Parameterization of a comprehensive explicit model for single-ring infiltration

2021

International audience; Comprehensive infiltration models can simultaneously describe transient and steady-state infiltration behaviors, and therefore can be applied to a range of experimental conditions. However, satisfactory model accuracy re- quires proper parameterization, including estimating the transition time from transient to steady-state flow conditions (τcrit). This study focused on improving the estimation of two parameters – τcrit and a second constant called a – used in a comprehensive, explicit, two-term model for single ring infiltration (hereafter referred to as the SA model). Different studies have recommended that a should be as low as 0.45 to as high as 0.91. Furthermore…

ChemInform Abstract: Palladium Supported on Cross-Linked Imidazolium Network on Silica as Highly Sustainable Catalysts for the Suzuki Reaction under …

2013

3-Mercaptopropyl-modified silica-supported bis-imidazolium Pd-catalysts are developed and successfully utilized for Suzuki reactions.